Home > SECO SURVEYING
Sort By:
Page of 1
Gammon Reel with 12 ft Cord
Gammon Reel with 12 ft Cord

The 12-foot (3.7 m) Gammon Reel® is a handy retracting plumb bob cord reel

  • Automatically rewinds when not in use
  • Weighs 0.20 lb (0.09 kg)
    •  more info
    550.00: $23.95
    		Qty Add
    Plan holder hangs on the back or front of any vehicle seat
    Plan holder hangs on the back or front of any vehicle seat

    • Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
    • Scale width graduated to fill the entire face of the rod,
    • Measuring scale on the back side that allows for overall height readings
    • Special molded stand-off ribs protect the scales from wear
    • Made with strong fiberglass, which is waterproof and corrosion-resistant
    • CR Rod series is non-conductive
    • Perfect for laser detector mounting with no special brackets required
    • Five section rod
    • Collapsed length is 57.75 inches (1.47 m)
    • Graduations in 10ths
    • Length 20 ft
    • Weighs 7.00 lb (3.17 kg)
     more info
    550.00: $39.95
    		Qty Add
    8068 Safety Utility Vest - Flo Yellow
    8068 Safety Utility Vest - Flo Yellow

    Designed to comply with ANSI/ISEA Class 2 standards for high-visibility safety apparel

  • Features convenient pockets with sturdy snap fasteners, map pocket and mic clip
  • 100% polyester
  • Vest is fluorescent yellow
  • Weighs 1.67 lb (0.76 kg)
    •  more info
    550.00: $78.95
    		Qty Add
    8068 Safety Utility Vest - Flo Orange
    8068 Safety Utility Vest - Flo Orange

    Designed to comply with ANSI/ISEA Class 2 standards for high-visibility safety apparel

  • Features convenient pockets with sturdy snap fasteners, map pocket and mic clip
  • 100% polyester
  • Vest is fluorescent orange
  • Weighs 1.67 lb (0.76 kg)
    •  more info
    550.00: $78.95
    		Qty Add
    Rod Bracket for Topcon LS-70 and LS-80
    Rod Bracket for Topcon LS-70 and LS-80

    The high-quality, all-metal bracket fit both the ash/aluminum and aluminum Laser DE Rods

  • Constructed of anodized aluminum and brass, the bracket is designed for years of field service
  • Use with a Laser DE Rod and your laser receiver for quick and accurate elevation readings
  • For all rod types
  • Designed to fit Topcon LS -30, LS -50, LS -70, LS -80
  • Weighs 0.52 lb (0.24 kg)
    •  more info
    550.00: $99.95
    		Qty Add
    Ash/Aluminum DE Laser Rod with Cut & Fill 10ths/100ths Grad
    Ash/Aluminum DE Laser Rod with Cut & Fill 10ths/100ths Grad
    These DE Rods extend 10 feet (3 meters) and retract to 5.4 feet (1.6 meters)
  • Made of ash and aluminum
  • Graduated, continuous tape faces (10ths/100ths) comes in Cut and Fill and are constructed of stainless steel or UV-protected PVC material
  • Feature a side rail for connecting an optional bracket for a laser receiver
  • Weighs 7.00 lb (3.20 kg)
    •  more info
    550.00: $259.00
    		Qty Add
    To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>