|
|
|
|
|
|
Mechanical Pencil 1.1mm Black Lead
|
|
|
Do you like pencils but fear they will break when it matters most? You're not alone. A Rite in the Rain Mechanical Pencil may well be the last pencil you'll ever need to buy. True to the Rite in the Rain brand, this pencil is tough, reliable, made in the USA, and writes no matter what.
⢠Refills included: 7 (1.1 mm) leads and 2 extra erasers.
Additional refills available. ⢠Patented tip expands so lead won't break,
wobble, twist or fall out in the field. ⢠Strong resin barrel fits comfortably in your hand.
|
|
|
|
|
|
|
|
|
|
3-lb Cross Pein Hammer, 16-in Hickory Handle
|
|
|
The Cross Pein Hammer is perfect for shaping block, brick and stone. The 3-pound forged steel head with chamfered edges provides added durability. The 16-inch lacquered hickory handle offers added strength to the tool while striking.
|
|
|
|
|
|
|
|
|
|
Black Ink Tactical Clicker All Weather Pen
|
|
|
Pencils will work great on Rite in the Rain but sometimes you just need a pen. This 5 1/4 in long metal All-Weather Pen writes on wet paper and upside down in temperatures from -30F to 250F. The ink won't leak, evaporate or blow up in your pocket!
|
|
|
|
|
|
|
|
|
|
Notebook Pouch Tan CORDURA® fabric 5 1/2 in x 7 in
|
|
|
Equipped with a fold over flap, sturdy buckle closure, and the recently improved heavy duty waist clips, this CORDURA® fabric Pouch is ready for any exploration. It offers ample room for your 4" x 6" Notebook and extra supplies like maps, pencils, pens and flashlights. Closed size: 5 1/2 in x 7 in
|
|
|
|
|
|
|
|
|
|
Gammon Reel with 12 ft Cord
|
|
|
The 12-foot (3.7 m) Gammon Reel® is a handy retracting plumb bob cord reel Automatically rewinds when not in use Weighs 0.20 lb (0.09 kg)
|
|
|
|
|
|
|
|
|
|
Plan holder hangs on the back or front of any vehicle seat
|
|
|
- Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
- Scale width graduated to fill the entire face of the rod,
- Measuring scale on the back side that allows for overall height readings
- Special molded stand-off ribs protect the scales from wear
- Made with strong fiberglass, which is waterproof and corrosion-resistant
- CR Rod series is non-conductive
- Perfect for laser detector mounting with no special brackets required
- Five section rod
- Collapsed length is 57.75 inches (1.47 m)
- Graduations in 10ths
- Length 20 ft
- Weighs 7.00 lb (3.17 kg)
|
|
|
|
|
|
|
|
|
|
Rod Bracket for Topcon LS-70 and LS-80
|
|
|
The high-quality, all-metal bracket fit both the ash/aluminum and aluminum Laser DE Rods Constructed of anodized aluminum and brass, the bracket is designed for years of field service Use with a Laser DE Rod and your laser receiver for quick and accurate elevation readings For all rod types Designed to fit Topcon LS -30, LS -50, LS -70, LS -80 Weighs 0.52 lb (0.24 kg)
|
|
|
|
|
|
|
|
|
|
20 ft Rectangular Series (CR) â” 10ths Grad
|
|
|
- Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
- Scale width graduated to fill the entire face of the rod,
- Measuring scale on the back side that allows for overall height readings
- Special molded stand-off ribs protect the scales from wear
- Made with strong fiberglass, which is waterproof and corrosion-resistant
- CR Rod series is non-conductive
- Perfect for laser detector mounting with no special brackets required
- Five section rod
- Collapsed length is 57.75 inches (1.47 m)
- Graduations in 10ths
- Length 20 ft
- Weighs 7.00 lb (3.17 kg)
|
|
|
|
|
|
|
|
|
|
25 ft SVR Rod â” 10ths Grad
|
|
|
Features a new shorter collapsed length 58.5 inches and a lighter weight Constructed of strong, rigid fiberglass with reinforcing ribs for added stability Waterproof and nonconductive The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant Tight locking mechanism features round buttons that resist jamming from sand and dirt Features a 1/4 x 20 female adapter in top section Graduations 10ths Includes carrying case (#91411) Length 25 ft Weighs 6.00 lb (2.72 kg)
|
|
|
|
|
|
|
|
|
|
Ash/Aluminum DE Laser Rod with Cut & Fill 10ths/100ths Grad
|
|
|
These DE Rods extend 10 feet (3 meters) and retract to 5.4 feet (1.6 meters) Made of ash and aluminum Graduated, continuous tape faces (10ths/100ths) comes in Cut and Fill and are constructed of stainless steel or UV-protected PVC material Feature a side rail for connecting an optional bracket for a laser receiver Weighs 7.00 lb (3.20 kg)
|
|
|
|
