|
|
|
|
 |
Cone Holder
|
|

This DICKE CH150 18" and 28" Vehicle Traffic Cone Holder has a horizontal mount and is made of heavy-duty galvanized zinc-plated steel to withstand years of rugged use. This traffic cone holder bolts securely to work vehicles and holds 18" and 28" traffic cones. Hardware not included.(P/N: CH300) holds 36" traffic cones. Holders sold individually. Features: Capacity: Holds (10) 18" cones or (5) 28" conesLength: 22"Provides quick and easy access to traffic conesIdeal for vehicles with limited storageSilver powder-coated finishZinc-plated steel base
|
|
 |
|
|
|
|
 |
Mesh Lime Pant
|
|

♦ ANSI 107-2010 compliant Class E pants. ♦ ANSI Class 3 compliant when worn with Dicke Class 2 or 3 vests, t-shirts, or jackets. ♦ Drawstring waist with elastic. ♦ Pass through side pockets. ♦ Adjustable pant leg opening with heavy duty snaps for tight fit. ♦ Popular 4" triple trim reflective stripes. *P1300 is all mesh with horizontal and vertical stripes.
|
|
 |
|
|
|
|
 |
Baracade light
|
|

♦ AC4D combines an LED light source and 3-volt photocell technology with the popular "D" cell battery (not included). ♦ Extra light intensity is achieved via a computer designed, high clarity, polycarbonate lens. ♦ Features a light sensing photo cell to turn light on and off. ♦ Three modes are available - flash, steady, and off. ♦ Changing from a flashing type "A" to a steady burn type "C" and back is simple with push on the mode switch. ♦ Meets the May 2001 ITE purchase specification. ♦ Hardware included in each box of 10 lights: 10 - 3-1/2" bolts, 2 - on/off keys, and 1 wrench.
|
|
 |
|
|
|
|
 |
Lime Pullover Sweatshirt
|
|

♦ Meets ANSI 107-2010 Class 3 requirements. ♦ Polyester lined sleeves for easy pull-on and pull-off. ♦ Black lower front color prevents dirt and grime from showing. ♦ Hood is sewn flat at the crown providing comfort when worn with hard hat. ♦ Front pouch pocket. ♦ Heavy duty stitching with rib knit cuffing. ♦ 2" reflective silver stripes in Class 3 configuration.
|
|
 |
|
|
|
|
 |
Orange Pullover Sweatshirt
|
|

♦ Meets ANSI 107-2010 Class 3 requirements. ♦ Polyester lined sleeves for easy pull-on and pull-off. ♦ Black lower front color prevents dirt and grime from showing. ♦ Hood is sewn flat at the crown providing comfort when worn with hard hat. ♦ Front pouch pocket. ♦ Heavy duty stitching with rib knit cuffing. ♦ 2" reflective silver stripes in Class 3 configuration.
|
|
 |
|
|
|
|
 |
Lime Zip-up Sweatshirt
|
|

♦ Meets ANSI 107-2010 Class 3 requirements. ♦ Polyester lined sleeves for easy pull-on and pull-off. ♦ Black lower front color prevents dirt and grime from showing. ♦ Hood is sewn flat at the crown providing comfort when worn with hard hat. ♦ Front pouch pocket. ♦ Heavy duty stitching with rib knit cuffing. ♦ 2" reflective silver stripes in Class 3 configuration.
|
|
 |
|
|
|
|
 |
Tripod Stand for Rigid and Roll-Up Signs
|
|

The T55 tripod is an all-purpose three legged economy sign stand designed to hold 36" and 48" roll-up and rigid signs. Powder coated steel construction and ease of use makes the T55 a smart choice for low to medium wind conditions. ♦ Meets MUTCD specifications. ♦ NCHRP-350 compliant with a roll-up sign. ♦ Compact storage, economical, and easy to use. ♦ Holds 36" and 48" roll-up and rigid signs. ♦ Powder coated, all steel construction.
|
|
 |
|
|
|
|
 |
Tripod Stand for Rigid and Roll-Up Signs
|
|

The T155 tripod is an all-purpose three legged heavy duty sign stand designed to hold 36" and 48" rigid signs. Roll-up signs can also be displayed with the addition of the optional roll-up sign adapter. ♦ Meets MUTCD specifications, NCHRP-350 compliant. ♦ Telescoping mast, flagholder for 3 standard flags. ♦ Displays 36" and 48" rigid signs, displays roll-up signs with the addition of optional #RUB100 roll-up sign adapter. ♦ Powder coated, rugged square tubular steel construction.
|
|
 |
|
|
|
|
 |
Roll up sign (border only)
|
|

-All roll-up stands are MUTCD and NCHRP-350 compliant. -Fiberglass ribs, or cross bracing, feature a protective veil to prevent blooming and painful splinters. -Corner pockets are made of tough polycarbonate for durability. -Hook and loop strap for storag
|
|
 |
|
|
|
|
 |
Barrier Mount
|
|

-Barrier mount rigid -No spring with two stage mas -Sign brackets base spacing 7.5"-15"
|
|
 |